For interior and exterior use
Latermix Facile can be used in screeds and to create falls internally or externally, including for the application of “wet-on-wet” flooring. It is ideal for use on roofs, including sloping roofs, where its very smooth pore-free surface enables impermeable layers or paving to be directly applied.
Latermix Facile weighs approximately half as much as a traditional or flowing screed (approx. 1,000 Kg/m3 when laid). It reduces dead loading and is particularly suitable for reconstructing existing floors and roofs, or to prevent excessive loading in seismic zones.
Because it is over 6 times more insulating than traditional or flowing screeds (thermal conductivity lambda λ =0.251 W/mK) it improves the thermal resistance of floor and roof slabs and reduces thermal bridging. Its porosity improves acoustic insulation, including in association with specific resilient layers (see acoustic matting).
Multipurpose Lightweight Concrete
Latermix Facile can be used as a substrate, for incorporating services in floors, as a base or top screed, as an insulating base screed to support underfloor heating systems or for creating falls on flat roofs..
Suitable for sustainable construction
The use of natural raw materials in Latermix Facile, its manufacturing process, which respects the environment, and the absence of harmful emissions (even in the presence of fire), make it suitable for sustainable construction as certified by ANAB-ICEA, the Italian Accreditation Institute.
Latermix Facile bags (32 litres) have twice the on-site yield of a conventional 25 kg bag of screed mortar.
Strong, stable, durable, and CE-marked
LAtermix Facile has high compressive strength (9 MPa), is CE-marked to denote conformity to EN 13813 (screed materials and floor screeds), is dimensionally stable and non-deformable, and retains its properties unaltered over time.
Suitable for sloping surfaces and details
Thanks to its semi- dry “damp soil” consistency Latermix Facile can also be applied to sloping or uneven surfaces and can be shaped to create details, such as the falls in a screed for a wet room or shower.
Non-combustible and fire-resistant
This is a 100% mineral non-combustible product (Euroclass fire rating – A1) that is fire-resistant and safe, including in the presence of fire.
- As a lightweight insulating screed to take a ceramic or stone floor finish
- As thermal insulation and for creating falls including on flat or pitched roofs (on which the waterproofing layer can be laid directly).
- As a lightweight interlinking substrate (base screed) on a floor slab (incorporating levelled service runs if required ).
For interior and exterior use
Please contact our technical support email@example.com
Please refer to the product data sheet and documentation for complete information about application.
Apparent packed density (approx.) 800 Kg/m3
In-place density (approx.) 1000 Kg/m3
Average compressive strength (EN 13813) 9 MPa – N/mm2 (90 kg/cm2)
Thermal conductivity lambda λ 0,251 W/mK
Fire reaction: Euroclass A1fl (Incombustible)
Laying of ceramic or stone finishes after 7 days
- Bonded screed ≥ 3,5 cm
- Unbonded screed ≥ 5 cm
- Floating screed ≥ 6 cm
CE marking EN 13813 CA-C7-F3
Package: bags each of 32 litres on non-returnable wooden pallets, 60 bags/pallet – 1,92 m3/pallet.
Bags required per 1m2 of floor area 0,38 bags per 10 mm depth
Storage life: 12 months from date of packaging.
For more complete, detailed, and updated information, please refer to the product data sheet and safety data sheet.